Baby Lock Aria BLAR Instruction Manual Page 190
- Page / 200
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
ERROR MESSAGES
A-18
The bobbin thread is almost empty. This message is displayed when the bobbin thread is running
out.
The bobbin winder safety device has activated. Is the thread
tangled?
This message is displayed when the bobbin is being wound,
and the motor locks because the thread is tangled, etc.
The pockets are full. Delete a pattern. This message is displayed when the memory is full and a
pattern must be deleted.
The safety device has been activated.Is the thread tangled? Is
the needle bent?
This message is displayed when the motor locks due to
tangled thread or for other reasons related to thread delivery.
The shutoff support mode has been activated. Turn off the
machine.
This message appears when the machine is in the shutoff
support mode. Turn off the machine once to start the machine
again. (see page B-24)
The “Start/Stop” button does not operate with the foot
controller attached. Remove the foot controller.
This message is displayed when the “Start/Stop” button is
pushed to sew Utility stitches or Character/Decorative stitches
while the foot controller is connected.
The upper thread may not be threaded correctly. Thread the
upper thread from the beginning.
This message is displayed when it seems that the upper
thread has not been threaded correctly.
The USB media was changed. Do not change the USB media
while it is being read.
This message is displayed when you attempt to select a
pattern after the USB media in which the pattern is saved has
been changed.
There is no needle plate cover. Attach a needle plate cover. This message is displayed when the needle plate cover is not
attached.
This file cannot be used. This message appears if the file format is incompatible with
this machine. Check the list of compatible file formats. (see
page S-95)
This file exceeds the data capacity and cannot be used. Use a
suitable size file.
This message is displayed when the file size exceeds the data
capacity of the machine.
Confirm the file size and format. (see page S-96)
This key cannot be used at this time.
This message is displayed when you press in
the screen other than the Utility Stitch, or press
in the screen other than the Utility Stitch or
Character/Decorative Stitch.
This key does not operate when the needle is down. Raise the
needle and press the key again.
This message is displayed when a key on the LCD display is
touched while the needle is in the down position.
This stitch is not “Dual Feed Mode” compatible. This message appears when the dual feed foot cannot be used
with the current stitch. Select other stitch. (see page B-51)
This USB media cannot be used. This message is displayed when you try to use incompatible
media.
This USB media is incompatible. This message is displayed when you try to use incompatible
USB media. For a list of compatible USB media, visit
“ www.babylock.com
”.
To thread the needle, please remove the fabric from under the
presser foot.
This message is displayed if you press the “Automatic
Threading” button while the dual feed foot is attached and the
presser foot height is 3 mm (1/8 inches) or higher.
Remove the fabric, and then press the "Automatic Threading"
button again.
Transmitting by USB This message is displayed while the USB media is
transmitting.
Turn off the power and replace the needle plate. This message is displayed when you try to sew with a stitch
other than a middle needle position stitch while the single-hole
needle plate is installed.
USB media error This message is displayed when an error occurs with the USB
media.
USB media is not loaded. Load USB media. This message is displayed when you try to recall or save a
pattern while no USB media is loaded.
Use the presser foot lifter button to lower the presser foot. This message is displayed when a button, such as the
“Start/Stop” button, is pushed while the presser foot is raised.
Marks Error Messages Cause/Solution
- TRADEMARKS 2
- 3Electrical Hazards: 3
- 7This machine is not a toy: 4
- 8For a longer service life: 4
- 9For repair or adjustment: 4
- SAVE THESE INSTRUCTIONS 5
- Product Name: 6
- Model Number: 6
- Baby Lock Sewing Machine 6
- CONTENTS 8
- ■ Front View 10
- ■ Right-side/Rear View 10
- Included Accessories 13
- Lock retailer 14
- B Basic operations 16
- Getting Ready 16
- WARNING 17
- Basic operations B-17 19
- ■ Key Functions 21
- LCD SCREEN 22
- Basic operations B-21 23
- Basic operations B-23 25
- Basic operations B-25 27
- Basic operations B-27 29
- Function 31
- Pulling Up the Bobbin Thread 39
- Basic operations B-41 43
- Using Threads that Unwind 46
- ACCESSORY TO THE MACHINE 52
- Basic operations B-53 55
- Sewing Basics 58
- Sewing Reinforcement Stitches 61
- Automatic Reinforcement 61
- Stitching 61
- Sewing Lightweight Fabrics 65
- Sewing Stretch Fabrics 65
- STITCH SETTINGS 66
- Setting the Thread Tension 68
- ■ Upper Thread is Too Loose 69
- USEFUL FUNCTIONS 70
- → The key appears as 72
- (Automatic Presser Foot 73
- Pressure) 73
- Sewing S-19 75
- Utility Stitches 76
- SELECTING UTILITY STITCHES 77
- Saving Your Stitch Settings 78
- Sewing S-23 79
- Dart Seam 84
- Gathering 85
- Flat Fell Seam 85
- Finished flat fell seam 86
- Zigzag Stitches 87
- Elastic Zigzag Stitches 89
- Overcasting 89
- Quilting 91
- ■ Piecing 92
- Sewing S-37 93
- Sewing S-39 95
- CAUTION 100
- Blind Hem Stitches 101
- SEWING THE STITCHES 102
- Sewing S-47 103
- Appliqué 104
- Shelltuck Stitches 105
- Crazy Quilting 106
- Scallop Stitches 106
- Smocking Stitches 107
- Fagoting 108
- Tape or Elastic Attaching 108
- One-step Buttonholes 111
- Bar Tacks 115
- Multi-directional Sewing 119
- Zipper Insertion 120
- Sewing S-67 123
- STITCH SETTING CHART 124
- Sewing S-69 125
- Sewing S-71 127
- Sewing S-73 129
- Sewing S-75 131
- S Sewing 132
- Character/Decorative Stitches 132
- SELECTING STITCH PATTERNS 133
- Example: Entering “Blue Sky” 134
- Sewing S-79 135
- Example: 136
- Making Adjustments 138
- Sewing S-83 139
- EDITING STITCH PATTERNS 140
- Sewing S-85 141
- Changing the Size 142
- Sewing S-87 143
- Checking the Image 145
- COMBINING STITCH PATTERNS 146
- Combining Large and Small 147
- Stitch Patterns 147
- Combining Horizontal Mirror 148
- Image Stitch Patterns 148
- Combining Stitch Patterns of 148
- Different Length 148
- Sewing S-93 149
- ■ More Examples 150
- USING THE MEMORY FUNCTION 151
- Machine’s Memory 152
- Sewing S-97 153
- Computer 154
- Sewing S-99 155
- Recalling from USB Media 156
- Recalling from the Computer 157
- Press 158
- Sewing S-103 159
- How to Create Bobbin Work 160
- (Sewing) 160
- ABOUT BOBBIN WORK 161
- PREPARING FOR BOBBIN WORK 161
- Upper Threading 162
- Bobbin Work Free Motion 169
- TROUBLESHOOTING 172
- Appendix 173
- A Appendix 174
- ADJUSTING THE SCREEN 178
- Appendix A-9 181
- Incorrect thread tension 182
- Appendix A-11 183
- List of Symptoms 186
- Appendix A-15 187
- ERROR MESSAGES 190
- SPECIFICATIONS 191
- Upgrade Procedure Using USB 192
- Upgrade Procedure Using 193
- Printed in Taiwan 200
- XF6507-001 200
Related products and manuals for Sewing machines Baby Lock Aria BLAR
(48 pages)
(52 pages)© 2020, manymanuals.com. All rights reserved. | 0.363 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals