Baby Lock BL9 Owner's Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 56
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
12
Changing Needle
CAUTION:
Turn off the power switch when changing a needle.
Raise the needle by turning the handwheel toward you
and lower the presser foot.
Loosen the needle clamp screw by turning it counter-
clockwise.
Remove the needle from the clamp.
Insert the new needle into the clamp with the flat side
away from you.
When inserting the needle into the clamp, push it up as
far as it will go and tighten the clamp screw firmly with
the screwdriver.
* Check your needles frequently for barbed or
blunted points. Snags and runs in knits, fine silks
and silk-like fabrics are permanent and are almost
always caused by a damaged needle.
Place the flat side of the needle on something flat (needle
plate, glass etc.). The clearance between the needle and
flat surface should be consistent. Never use a bent or
blunt needle.
To check the needle
Thread and Needle Chart
Fabrics
Thread
Needle
Size
Crepe de Chine,
Voile,Lawn, Organdy,
Georgette,
Tricot
Light
weight
Medium
weight
Heavy
weight
Linens, Cotton. Pique,
Serge, Double Knits,
Percale
Denim, Tweed,
Gabardine, Coating,
Drapery and
Uphollstery Fabric
Fine Silk
Fine Cotton
Fine Synthetic
Fine Cotton
Covered Polyester
9
or
11
50 silk
50 to 80 Cotton
50 to 60 Synthetic
Cotton Coverd
Polyester
50 silk
40 to 50 Cotton
40 to 50 Synthetic
Cotton Coverd
Polyester
11
or
14
14
or
16
*
In general, fine threads and needles are used for
sewing thin fabrics, and thicker threads and
needles are used for sewing heavy fabrics.
Always test thread and needle size on a small piece
of fabric which will be used for actual sewing.
*
Use the same thread for needle and bobbin.
*
When sewing stretch, very fine fabrics, and
synthetics, use a stretch needle.
The stretch needle effectively prevents
skipped stitches.
*
When sewing very fine fabrics, sew over a piece
of paper to prevent distortion.
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Comments to this Manuals

No comments