Baby Lock Enlighten BLE3ATW-2 Instruction Manual download pdf (Page 25)

The rolled edge setting is used to achieve the narrowest stitch possible (1.5mm) on your Baby Lock serg-

er. The stitch is suitable for seaming sheer and lightweight fabrics and for edging and hemming lightweight

fabrics.

Rolled Edging

3-Thread Rolled Edge

With the stitch selector set on "D", a narrow hem will become a rolled edge. The fabric edge rolls around

the stitch finger. The upper looper wraps the fabric edge while the lower looper thread is nearly invisible on

the back side of the stitch formation.

Remove the left needle and thread. Clear the stitch fingers. Turn the stitch length adjusting dial counter-

clockwise into the rolled hem range at 0.75-4.0R setting (fig. A). Set the stitch width dial to 3.5 "M" (fig. B).

For a 3-thread rolled edge, move the stitch selector lever to "D" and follow the suggested settings and

threading diagram below.

NEEDLES

right

LENGTH

0.75-4.0R

WIDTH

3.5

STITCH

SELECTOR

WAVE

SELECTOR

OVERLOCK

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 55 56

No comments

Baby Lock Enlighten BLE3ATW-2 Instruction Manual Page 25