Baby Lock Enlighten BLE3ATW-2 Instruction Manual download pdf (Page 31)

Blind Hemming

Your Baby Lock Enlighten can create a sturdy, nearly invisible

blindhem.

1. Set the machine for 2-Thread Overlock-Narrow with the right

needle threaded. Set the stitch width at 5.0 and the stitch

length at 4.0 in the standard range.

2. Fold up the hemline and press it in place. Then fold the hem

allowance back against the fabric right side to create a fold

about 1/4 " from the top edge of the hem as shown (fig. A).

3. Align the fold under the presser foot and stitch, allowing the

needle to catch only a thread or two of the soft fold (fig. B). The

blade will trim the top edge of the hem and the loopers will over-

cast the edge for a clean finish (fig. B).

4. Open the fold and press flat (fig. C).

Note: An optional blindhem foot for consistent guiding is available

through your Baby Lock retailer (fig. D).

Page 7 Optional Accessories listing for part number.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 55 56

No comments

Baby Lock Enlighten BLE3ATW-2 Instruction Manual Page 31