Baby Lock imagine wave BLE3ATW Instruction Manual download pdf (Page 15)

1. Set the needle threader selector on "L" for left needle.

2. Place the thread on the far-left spindle on the thread stand (fig.A page 12).

Thread needle thread guides A and B, through the groove on the face place and through guides

C,D,E,F and G.

3. Lower the presser foot and thread the left needles as in steps 4 and 5, under "Right Needle."

1. Set the needle selector on "R" (right needle) or "L" (left needle).

2. Press the needle threader lever down (Fig. B) so that the hook goes into the eye of the needle.

The hook will remain in the eye of the needle until you press the needle threader lever down

again to release it.

3. Hold the needle thread horizontally with both hands and place the thread under the threader

hook guides. (Fig.C)

4. Press the needle threader lever down again. (Fig.D) The hook will pull the thread through the

eye of the needle as it is released.

NOTE: The machine in Locked Position also set

s the needle position for using the Needle

threader

This is also a safety feature when threading as the machine cannot sew while in locked position.

Left Needle

Looper Thread Fine-Tuning Screw

No adjustments are needed when sewing with most fabrics and

threads on your Baby Lock Imagine Wave, but certain threads or

fabrics may require minor fine-tuning of the looper delivery system

to perfect your stitches. Increase or decrease the delivery of the

looper threads with the upper and lower looper thread fine-tuning

screw. With a screwdriver (found in accessory kit), turn the fine-tun-

ing screw clockwise to tighten the looper threads. Turn the screw

counter-clockwise to loosen the looper threads.

Ideal Stitch

Looper threads are

too loose.

Looper threads are

too tight.

Standard Position Tighten the screw ( + ) Loosen the screw ( - )

Needle

Threader

Needle

Threader

Selector

Needle

threader Lever

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 55 56

No comments

Baby Lock imagine wave BLE3ATW Instruction Manual Page 15