Baby Lock imagine wave BLE3ATW Instruction Manual download pdf (Page 29)

Sew a 2-thread flatlock seam then pull the two fabric layers apart until

the seam lies flat (fig. A).

Because the threads show on the outside as well as the inside of the

garment or project, the flatlock seam is often considered a decorative

application (fig. B).

For 2-thread flatlock - narrow

1. Lock the machine.

2. Place needle thread on right needle spool pin.

3. Thread needle thread through the upper looper thread guide on top

of the machine, then go down the thread path in the front of the

machine. Go left with the needle thread at the hook on front of the

machine. Then t

ake the needle thread through the normal needle

thread paths. (See illustration below).

4. Engage the subsidiary looper following step 3 on page 25.

5. Thread the lower looper as shown in the illustration below

If you want the "overlock stitching" to show on the right side of the fab-

ric, place wrong sides together and sew. (Fig. C)

2-Thread Flatlock - Narrow

Loop

Wrong Side

Needle

Thread

Right

Side

Looper

Thread

Right

Side

Wrong Side

NEEDLES

right

LENGTH

3-3.5

WIDTH

3.5

STITCH

SELECTOR

WAVE

SELECTOR

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 55 56

No comments

Baby Lock imagine wave BLE3ATW Instruction Manual Page 29